LF4X: Temperature range from -12°C to -32°C (10°F to -25°F). A new cold wax for dry friction conditions, which can be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has a great durability. Recommended iron temp: 155°C (311°F).The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scrape after approximately one minute. A good iron is essential to get an efficient melting of the wax. In the warmer part of the temperature range, and when high air humidity, Cera F powder, such as FC04X will increase the performance.

LF5X:Temperature range from -8°C to -14°C (18°F to 7°F). A new special wax ,easier to apply than LF4X while providing outstanding glide properties and durability within its temperature range. Recommended iron temp: 150°C (311°F). The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scrape after approximately one minute. A good iron is essential to get an efficient melting of the wax. LF05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X.

LF6X: Temperature range from -5°C to -10°C (23°F to 14°F). This wax is very versatile. Its area of use stretches from under layer for Cera F powder, racing wax and base prep wax for cold skis. LF06X has a good durability and offers great performance on artificial snow. Recommended iron temp: 145°C (293°F). The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scrape after approximately one minute. A good iron is essential to get an efficient melting of the wax. When used as a base for Cera F, Swix recommends FC06X powder.

LF7X: Temperature range from -2°C to -8°C (28°F to 18°F). A new and improved wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with .Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. Recommended iron temp: 140°C (284°F). The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scrape after approximately one minute. A good iron is essential to get an efficient melting of the wax. When used as a base for Cera F, Swix recommends FC07X powder.

LF8X: Temperature range from -4°C to 4°C (25°F to 39°F). Easy to melt and very convenient to work with LF8X is a great wax for both base-prep and training, It can also can be used as a race wax, preferably with Cera F powder on top. Recommended iron temp: 130°C (266°F). The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scrape after approximately one minute. A good iron is essential to get an efficient melting of the wax. When used as a base for Cera F, Swix recommends FC08X powder.

LF10X: Temperature range from 0°C to 10°C (32°F to 50°F). A new wax in for the Cera Nova X line made a little bit harder than the old LF10. Test results show that a slightly harder wax performs better in this area, especially noticeable when used alone. The adjusted hardness has also improved durability. It’s a good wax for base prep wax, but also a great training wax. Recommended iron temp: 120°C (248°F).The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scrape after approximately one minute. A good iron is essential to get an efficient melting of the wax. When used as a base for Cera F, Swix recommends FC010X powder.